Installing the server – Nortel Networks CALLPILOT 555-7101-215 User Manual
Page 38
Advertising
Installing the server and connecting the peripheral devices
Standard 1.0
38
CallPilot
Installing the server
Introduction
Before you install the 702t server, ensure that the chosen location meets the
requirements identified on the “Site inspection checklist” provided in Part 1
of the CallPilot Installation and Configuration binder.
To install the server
Place the 702t server in its chosen location.
Connect peripheral devices as described in the remainder of this chapter.
ATTENTION
Do not connect the server to power yet.
Advertising