NETGEAR ProSafe FVS124G User Manual
Page 108
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
6-32
Firewall Protection and Content Filtering
202-10085-01, March 2005
Items to include in the log:
•
Use these checkboxes to determine which events are included in the log. Selecting all events
will increase the size of the log, so it is good practice to disable any events which are not really
required.
•
Selecting an event under Include In Log will enable logging of messages pertaining to that
event. Ex: Selecting Admin Login, will enable generation of log messages whenever Admin
logs in.
•
Selecting an event under Include In Alerts will enable logging of messages pertaining to that
event. This category typically contains Internet Attack events. Ex: Selecting SYN Flood, will
enable generation of Alert messages whenever SYN Flood occurs.
Emailing logs:
•
If you have Email Logs enabled, you'll receive these logs in an Email message.
•
To receive alerts and logs by e-mail you have to enable Email Logs option.
–
In the Respond to Identd from SMTP Server check this box to respond to IDENT protocol.
–
In the Email Server address Enter E-mail outgoing SMTP mail server of your ISP (for
example, 172.16.1.10).
–
If you leave this box blank, no alerts or logs will be sent to you.
–
In the Return Email Address box, type the user's e-mail address.
–
In the Log / Alert Email box, type the e-mail address where the logs and alerts will be sent.
Use a full e-mail address (for example, [email protected]).
–
In the Authenticate with SMTP server Check this box to enable authentication for alerts
and logs.
–
In the User Name Box, fill the user name for SMTP authentication.
–
In the Password Box, fill the password for SMTP authentication.
Syslog—Enable or disable as required:
•
Disable - Select this if you don't have a Syslog server.
•
Enable - Syslog server IP address - If your Syslog server has a fixed IP address, select this
option, and enter the IP address of your Syslog server and select appropriate syslog facility.
Message length and frequency:
•
In the Log Queue Length box, set the logs queue length.