NETGEAR ProSafe FVS124G - Manual (Page 55)

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
Connecting the FVS124G to the Internet 4-11
202-10085-01, March 2005
2. The steps to configure WAN port 2 are as follows:
a. Repeat the above steps to set up the parameters for ISP2. Start by clicking the WAN2 ISP
link directly under WAN Setup on the upper left of the main menu to get the WAN2 ISP
Settings screen shown in
Figure 4-3 . Next click Setup Wizard on the WAN2 ISP Settings
screen to get the Setup Wizard (WAN2) screen. Then click Next and follow the steps in the
WAN2 Setup Wizard for inputting the configuration parameters from your ISP2 to connect
to the Internet.
b. Set up the traffic meter for ISP2 if desired. See “Programming the Traffic Meter (if
Desired)” on page 4-13 .