Configuring the fvs124g, Configuring the vpn client, Configuring the fvs124g -12 – NETGEAR ProSafe FVS124G User Manual
Page 124: Configuring the vpn client -12
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
7-12
Virtual Private Networking
202-10085-01, March 2005
This procedure was developed and tested using:
•
Netgear FVS124G ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports with
version 1.0 firmware
•
Netgear VPN Client version 10.3.5 (Build 6)
•
NAT router: Netgear FR114P with version 1.5_09 firmware
Configuring the FVS124G
1.
Select the VPN Wizard
2.
Give the client connection a name, such as home.
3.
Enter a value for the pre-shared key.
4.
Select 'a remote VPN client'.
Figure 7-14: VPN Wizard
5.
Click Next to go to the summary page.
6.
Click Done to create the 'home' IKE and VPN policies.
Configuring the VPN Client
1.
Right-click on the VPN client icon in your Windows toolbar and select the Security Policy
Editor.