NETGEAR ProSafe FVS124G - Manual (Page 90)

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
6-14 Firewall Protection and Content Filtering
202-10085-01, March 2005
QoS Priority This setting determines the priority of a service, which in turn, determines the quality
of that service for the traffic passing through the firewall. By default, the priority
shown is that of the selected service. The user can change it accordingly. If the user
does not make a selection (i.e, leaves it as None), then the native priority of the
service will be applied to the policy. +5 is the highest priority. See
“Quality of Service
(QoS) Priorities” on page 6-18 .
Log This determines whether packets covered by this rule are logged. Select the desired
action:
• Always - always log traffic considered by this rule, whether it matches or not. This is
useful when debugging your rules.
• Never - never log traffic considered by this rule, whether it matches or not.
Table 6-1. Outbound Services
Item Description