NETGEAR ProSafe FVS124G - Manual (Page 114)

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
7-2 Virtual Private Networking
202-10085-01, March 2005
Figure 7-1 shows the setup screens for the selected WAN mode. This setup is accomplished in
“Step 4: Configure the WAN Mode (Required for Dual WAN)” on page 4-15 .
Figure 7-1: WAN Mode Setup screens
Fully Qualified Domain Names
The use of fully qualified domain names is:
• Mandatory when the WAN ports are in rollover mode ( Figure 7-2 )
• Mandatory when the WAN port are in load balancing mode and the IP addresses are dynamic
(
Figure 7-3 )
• Optional when the WAN ports are in load balancing mode the IP addresses are static
(
Figure 7-3 )
Rollover Mode Setup Screen Load Balancing Mode Setup Screen