NETGEAR ProSafe FVS124G - Manual (Page 70)

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
5-2 LAN Configuration
202-10085-01, March 2005
Figure 5-1: LAN IP Setup menu
Configuring LAN TCP/IP Setup Parameters
LAN TCP/IP Setup—The default values are suitable for most users and situations. These are
advanced settings that you may configure if you are a network administrator. RIP is applicable if
your network contains multiple routers.
• IP Address: Type the IP address of your router (factory default: 192.168.1.1).
Note: Once you have completed the LAN IP setup, all outbound traffic is allowed and all
inbound traffic is discarded. To change these traffic rules, refer to
Chapter 6, “Firewall
Protection and Content Filtering .