NETGEAR ProSafe FVS124G - Manual (Page 152)

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
8-18 Router and Network Management
202-10085-01, March 2005
WAN Ports
You can monitor the status of the WAN connections, Dynamic DNS services, and Internet traffic
information.
WAN Port Connection Status
Invoke the Connection Status screen from WAN ISP Basic Settings screens by clicking on WAN
Status to view the current connection state of the WAN port.
Figure 8-7: Connection Status screen
Table 8-1. Current date and time
Item Description
Use Default NTP
Servers (Network
Time Protocol) If enabled, the system clock is updated regularly by contacting a Default Netgear
NTP Server on the Internet.
Use Custom NTP
Servers If you prefer to use a particular NTP server, enable this and enter the name or IP
address of an NTP Server in the Server 1 Name/IP Address field. If required, you can
also enter the address of another NTP server in the Server 2 Name/IP Address
field.If you select this option and leave either Server 1 or Server 2 fields empty, they
get set to Default Netgear NTP servers