NETGEAR ProSafe FVS124G User Manual
Page 75
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
LAN Configuration
5-7
202-10085-01, March 2005
From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the
Static Route menu, shown below.
Figure 5-4.
Static Routes Summary Table and Add screens
To add or edit a Static Route:
1.
Click the Add button to open the Add/Edit Menu, shown below.
2.
Type a route name for this static route in the Route Name box under the table.
(This is for identification purpose only.)
3.
Select Private if you want to limit access to the LAN only. The static route will not be reported
in RIP.
4.
Select Active to make this route effective.
5.
Type the Destination IP Address of the final destination.
6.
Type the IP Subnet Mask for this destination.
If the destination is a single host, type 255.255.255.255.
7.
Type the Gateway IP Address, which must be a firewall on the same LAN segment as the
firewall.