NetComm V24W User Manual
Page 15
NetComm VoIP WiFi Phone V24W User Guide
25
Move down to Password and press Edit soft key. Enter the
Password in the prompt window and press the Center
Selection Key.
Note: Press the * (star) key to switch between the different modes (Capital
letters, small letters and numbers).
26
On the SIP Settings screen, select “Return”.
27
On the main menu, select Return.
28
The standby screen will indicate that the IP Phone is ready
for phone calls (Ready message at the top of the screen).
Note: You can disable the phone password settings if you do not want to
enter the password every time you turn on the device. Change the Enable
setting in Phone Settings > Password Setting; change it from “Yes” to
“No”. Please be aware that you can not access the SIP settings page when
Password setting is disabled.
YML873 V24W User Guide - 14