NetComm V24W - Manual (Page 28)

NetComm VoIP WiFi Phone V24W User Guide
Clock Type. There are two types available, Analog and Digital. To change the format,
highlight Clock Type, and press the left soft key.
Time Zones. Press the left soft key to select the Time Zone setting. A list of multiple time
zones will be displayed. The selected time zone is indicated by the <*> symbol. Scroll
through the choices, and highlight the time zone. Then press Settings soft key to save
your change. Press the Exit soft key to return to the Date & Time menu without changing
the time zone.
Enable NTP. When Yes is displayed, the Network Timing Protocol (NTP) automatically sets the
time and date for your phone. To disable NTP, press the left soft key until it displays No.
Daylight Time. Press the left soft key to turn it on and off.
Date. Press the left soft key to select the Date setting. A new prompt window will be displayed.
Make your changes, and then press the center selection key to save your change. Press the Exit
soft key to return to the Date & Time menu without changing the date. Option not available when
Enable NTP is Yes.
Clock. Press the left soft key to select the Clock setting. A new prompt window will be displayed.
Make your changes, and press the center selection key to save your changes. Press the Exit soft
key to return to the Date & Time menu without changing the time. Option not available
when Enable NTP is Yes.
Language
The selected language is indicated by the <*> symbol. Highlight the language you want t
use, and then press the left soft key to save your change. Press the Exit soft key to retu
to the Phone Settings menu without changing the language.
o
rn
Phone Password
By default, user does not need to enter a password. To protect your phone so only users
who know the password can use the V24W Phone, you can set a user password.
To enable the user password for the WiFi IP Phone
To enable the user password for the V24W Phone, press the left soft key to select the
Phone Password setting and then press the Edit soft key.
To set a new password, scroll down to Password and press the Edit soft key. Enter your new
password and press the center selection key to save the new password. Press the Exit
soft key if you do not want to change the password.
The next time the IP Phone is powered on, it will ask for the Phone Password. Enter your
user password in the field provided, and then press the OK soft key.
NOTE: The default user password is 0000.
YML873 V24W User Guide - 27