NetComm V24W User Manual

Page 9

Advertising
background image

NetComm VoIP WiFi Phone V24W User Guide

2

The phone will boot up and automatically scan the wireless
network.

Notes: This might take a few minutes to complete.

3

A list of wireless network will be displayed. You can see the
wireless name (SSID), security status (a lock means wireless
security is enable) and the signal strength for each wireless
network.

4

Use the Navigation Pad to highlight your wireless network
SSID and then press the Center Selection Key.
Notes: If you do not see your wireless network SSID in the
list, your wireless network may not be set to broadcast the
SSID. Please refer to the User guide for more information on
how to set up wireless profile to connect to wireless network
manually.

5

The phone will automatically connect to the selected wireless
network.

5a. If WEP security is enabled on the selected network, a
new screen will appear. Using the Navigation Pad, select the
correct key index and move to the WEP Key field. Enter the
network’s WEP key and then press the Center Selection
Key
.

YML873 V24W User Guide - 8

Advertising