NetComm IP DSLAM NCT480 - Manual (Page 23)

YML856 Rev3 NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide
www.netcomm.com.au 3
ChAPTeR 4 INSTALLING The NCT480
This chapter describes how to install the NCT480 mini IP-DSLAM.
This chapter contains the following sections:
• Installation Checklist
• NCT480 System Installation Procedures
Installation Checklist
The Table 4-1 lists the task to be completed when installing the NCT480 mini IP-DSLAM.
Installation Procedures Page Number
Unpack the Shipping Carton 20
Setup the hardware environments:
• Connect the Console port to the PC’s COM port
• Configure the PC’s COM port
• Connect RJ-21 IP DSLAM Cable (Telco Cable)
• Connect RJ-45 Network uplink Interface
• Power on the System
Table 4-1 Installation Checklist