NetComm IP DSLAM NCT480 - Manual (Page 68)

NCT480 IP DSLAM User Guide YML856 Rev3
68 www.netcomm.com.au
Set PPPoA MAC
The PPPoA MAC address to be used in the PPPoE packets from DSLAM to the BRAS is configurable. One
MAC address can be assigned to multiple PPPoA terminations. The PPPoE session identifier is additionally
used to perform the de-multiplexing in the BRAS to customer direction.
Figure 4- Set PPPoA MAC Dialog
Item Description
PPPoA MAC Configure the MAC address to be used by the PPPoE tunnel interface.
Table 4-8 Add PPPoA MAC