NetComm IP DSLAM NCT480 - Manual (Page 48)

NCT480 IP DSLAM User Guide YML856 Rev3
48 www.netcomm.com.au
Restore factory Configuration
Use restore factory configuration to restore configuration parameters of factory default values.
Figure -1 Restore Factory Configuration
The restore factory default parameters are list in Table 2-6.
Item Description
ADSL Layer
vPCI (vPI/vCI) 8/35 for each ADSL port interface.
encapsulation LLCMUX
Standard ADSL2+ Auto
Bridge Layer and ethernet IP
Bridge mode Restricted bridge mode
ethernet port 1 IP address 0.0.0.0 / 0.0.0.0, Uplink
ethernet port 2 IP address 0.0.0.0 / 0.0.0.0, Downlink
ethernet port 3 IP address 192.168.1.1 / 255.255.255.0, management port
Management
SNMP community public (re-write privilege)
Web Management Username /
Password admin / admin
CLI Username / Password admin / admin
Telnet Username / Password admin / admin
Table -6 NCT480 System Factory Default Parameters