NetComm IP DSLAM NCT480 - Manual (Page 55)

YML856 Rev3 NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide
www.netcomm.com.au 55
ChAPTeR 4 DePLOyMeNT MeNU
The deployment menu contains DSL profile, physical interface setting, network Ethernet and ADSL port.
This chapter contains the following sections:
• DSL Port
• DSL Profile Configuration
• DSL Profile Mapping
• DSL Alarm Profile
• Power Management Mode
• PVC Setting
• Route Setting
• Ethernet Setting
• SNMP Host
• SNMP Community
DSL Port
This section describes how to enable and disable port through Enable/disable dialog.
Figure 4-1 DSL Port Configuration Dialog
Table 4-1 Enable / Disable port
Item Description
Port selection pull down menu Select port to be enabled or disabled
Admin status Display port status