NetComm Wireless Access Point NP720 - Manual (Page 109)

Wireless Access Point User Guide
106
get wdsMacList Display WDS Mac Address List
get enableWirelessCli-
ent Display Wireless Client Enable/Disable
get isolationType Display Isolation Type
get winsEnable Display WINS Server Enable/Disable
get winsserveraddr Display IP address of WINS server
get wirelessSeparate Display wireless seprate Mode
get description Display Access Point Description
get dhcpmode Display dhcp mode
get wlanstate Display wlan state
help Display CLI Command List
Lebradeb Disable reboot during radar detection
ls list directory
mem system memory statistics
np Network Performance
ns Network Performance Server
ping Ping
radar! Simulate radar detection on current channel
reboot Reboot Access Point
rm Remove file
run Run command file
quit
Logoff
set 11gonly Set 11g Only Allowed
set 11goptimize Set 11g Optimization Level
set 11goverlapbss Set Overlapping BSS Protection
set acl Set Access Control List
set aging Set Aging Interval
set antenna Set Antenna
set authentication Set Authentication Type