NetComm Wireless Access Point NP720 - Manual (Page 76)

Access Point Management
73
Data - Admin Login Screen
Login
User Name Enter the login name for the Administrator.
Change Admin Password If you wish to change the Admin password, check this field
and enter the new login password in the fields below.
New Password Enter the desired login password.
Repeat New Password Re-enter the desired login password.
Admin Connections
Allow Admin connections
via wired Ethernet only If checked, then Admin connections via the Wireless interface
will not be accepted.
Enable HTTP Enable this to allow admin connections via HTTP. If enabled,
you must provide a port number in the field below. Either
HTTP or HTTPS must be enabled.
HTTP Port Number Enter the port number to be used for HTTP connections to this
device. The default value is 80.
Enable HTTPS Enable this to allow admin connections via HTTPS (secure
HTTP). If enabled, you must provide a port number in the
field below. Either HTTP or HTTPS must be enabled.
HTTPS Port Number Enter the port number to be used for HTTPS connections to
this device. The default value is 443.
Enable Telnet If desired, you can enable this option. If enabled, you will able
to connect to this AP using a Telnet client. You will have to
provide the same login data (user name, password) as for a
HTTP (Web) connection.