NetComm Wireless Access Point NP720 - Manual (Page 69)

Wireless Access Point User Guide
66
Data - Status Screen
Access Point
Access Point Name The current name will be displayed.
MAC Address The MAC (physical) address of the Wireless Access Point.
Domain The region or domain, as selected on the System screen.
Firmware Version The version of the firmware currently installed.
TCP/IP
IP Address The IP Address of the Wireless Access Point.
Subnet Mask The Network Mask (Subnet Mask) for the IP Address above.
Gateway Enter the Gateway for the LAN segment to which the Wireless
Access Point is attached (the same value as the PCs on that LAN
segment).
DHCP Client This indicates whether the current IP address was obtained from a
DHCP Server on your network.
It will display "Enabled" or "Disabled".
Ethernet
Ethernet Status The current Ethernet status is displayed.
Wireless
Channel/Frequency The Channel currently in use is displayed.
Wireless Mode The current mode (e.g. 802.11g) is displayed.
AP Mode The current Access Point mode is displayed.
Bridge Mode The current Bridge mode is displayed.
Security Profiles
Name This displays the current name of each security profile.
SSID This displays the SSID associated with the profile.
Status This indicates whether or not the profile is enabled.
Buttons
Statistics Click this to open a sub-window where you can view Statistics on
data transmitted or received by the Access Point.
Profile Status Click this to open a sub-window which displays further details
about each security profile.
Log Click this to open a sub-window where you can view the activity
log.
Stations Click this to open a sub-window where you can view the list of
all current Wireless Stations using the Access Point.