NetComm Wireless Access Point NP720 User Manual
Page 110
Appendix E - Command Line Interface
107
set autochannelselect
Set Auto Channel Selection
set basic11b
Set Use of Basic 11b Rates
set basic11g
Set Use of Basic 11g Rates
set beaconinterval
Modify Beacon Interval
set burstSeqThreshold
Set Max Number of frames in a Burst
set burstTime
Set Burst Time
set calibration
Set Calibration Period
set cckTrigHigh
Set Higher Trigger Threshold for CCK Phy Errors For ANI
Control
set cckTrigLow
Set Lower Trigger Threshold for CCK Phy Errors For ANI
Control
set cckWeakSigThr
Set ANI Parameter for CCK Weak Signal Detection Threshold
set channel
Set Radio Channel
set cipher
Set Cipher
set compproc
Set Compression Scheme
set compwinsize
Set Compression Window Size
set countrycode
Set Country Code
set ctsmode
Set CTS Mode
set ctsrate
Set CTS Rate
set ctstype
Set CTS Type
set domainsuffix
Set Domain Name Server Suffix
set dtim
Set Data Beacon Rate (DTIM)
set enableANI
Turn Adaptive Noise Immunity Control On/Off
set encryption
Set Encryption Mode
set extendedchanmode
Set Extended Channel Mode
set factorydefault
Restore to Default Factory Settings
set firStepLvl
Set ANI Parameter for FirStepLevel
set fragmentthreshold
Set Fragment Threshold
set frequency
Set Radio Frequency (MHz)