NetComm Wireless Access Point NP720 - Manual (Page 36)

Access Point Setup
33
AES.
Group Key Update This refers to the key used for broadcast transmissions. Enable
this if you want the keys to be updated regularly.
Key Lifetime This field determines how often the Group key is dynamically
updated. Enter the desired value.
Update Group key
when any membership
terminates If enabled, the Group key will be updated whenever any member
leaves the group or disassociates from the Access Point.
Enable Radius Ac-
counting Enable this if you want this Access Point to send accounting data
to the Radius Server.
If enabled, the port used by your Radius Server must be entered
in the "Radius Accounting Port" field.
Update Report
every... If Radius accounting is enabled, you can enable this and enter the
desired update interval. This Access Point will then send updates
according to the specified time period.
Radius MAC
Authentication The current status is displayed. This will always be "Disabled",
because Radius MAC Authentication is not available with WPA -
PSK. The Configure button for this feature will also be disabled.
UAM The current status is displayed. This will always be "Disabled",
because UAM is not available with WPA - PSK. The Configure
button for this feature will also be disabled.