Checking tcp/ip settings - windows 2000 – NetComm Wireless Access Point NP720 User Manual
Page 95
Advertising
Wireless Access Point User Guide
92
Checking TCP/IP Settings - Windows 2000
1. Select Control Panel - Network and Dial-up Connection.
2. Right click the Local Area Connection icon and select Properties. You should see a screen
like the following:
Figure 70: Network Configuration (Win 2000)
3. Select the TCP/IP protocol for your network card.
4. Click on the Properties button. You should then see a screen like the following.
Figure 71: TCP/IP Properties (Win 2000)
Advertising