NetComm Wireless Access Point NP720 - Manual (Page 90)

Appendix B - Troubleshooting
87
Problem 2: My PC can't connect to the LAN via the Wireless Access Point.
Solution 2 Check the following:
• The SSID and WEP settings on the PC match the settings on the Wire-
less Access Point.
• On the PC, the wireless mode is set to "Infrastructure"
• If using the Access Control feature, the PC's name and address is in the
Trusted Stations list.
• If using 802.1x mode, ensure the PC's 802.1x software is configured
correctly. See Chapter 4 for details of setup for the Windows XP 802.1x
client. If using a different client, refer to the vendor's documentation.