Netopia R2121 - Manual (Page 107)

IP Setup, SmartIP and Network Address Translation 10-3
Using Network Address Translation
The following procedure describes how to use Network Address Translation.
1. Pick a network number for your local network (referred to as the internal network). This can be any IP
address range you want. The Netopia R2121 Dual Analog Router has a default IP address of 192.168.1.1.
You may choose to change this address to match a pre-existing addressing scheme. For this example, we
will use 10.0.0.0.
Note: The outside world (the external network) will not see this network number.
2. Using the internal network number, assign addresses to the local nodes on your LAN. For example, you
may assign
■ 10.0.0.1 to your Netopia R2121
■ 10.0.0.2 to a node running as a World Wide Web ser ver
■ 10.0.0.3 to an FTP ser ver
■ 10.0.0.4 to a Windows NT PC
■ 10.0.0.5 to a Windows 95 PC
Note: See “Associating por t numbers to nodes” on page 10-5 .
3. You created a Connection Profile for your ISP when you ran the Smar tStar t application. In the Connection
Profile, you can toggle Address Translation Enabled to Yes or No (Yes to enable NAT) and press Return.
The Easy Setup Connection Profile is accessible either:
■ from the Easy Setup menu in the Main Menu screen, go to the Next Screen Connection Profile 1: Easy
Setup Profile
■ or, from the WAN Configuration menu in the Main Menu screen. Go to the Display/Change Connection
Connection Profile 1: Easy Setup Profile
Number to Dial: 12345678901234567890
Address Translation Enabled: Yes
Local WAN IP Address: 0.0.0.0
Remote IP Address: 127.0.0.2
Remote IP Mask: 255.0.0.0
PPP Authentication... PAP
Send User Name:
Send Password:
PREVIOUS SCREEN NEXT SCREEN
Enter the directory number for the remote network connection.
Enter basic information about your WAN connection with this screen.