Netopia R2121 - Manual (Page 41)

Setting up your Router with the SmartStart Wizard 3-11
Static configuration (optional)
If you are manually configuring for a fixed or static IP address, per form the following:
1. Go to Star t Menu/Settings/Control Panels and double click the Network icon. From the Network
components list, select the Configuration tab.
2. Select TCP/IP-->Your Network Card. Then select Proper ties. In the TCP/IP Proper ties screen (shown below),
select the IP Address tab. Click “Specify an IP Address.”
Enter the following:
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
This address is an example of one that can be used to configure the router with the Easy option in the
Smar tStar t Wizard. Your ISP or network administrator may ask you to use a different IP address and subnet
mask.