Netopia R2121 - Manual (Page 123)

IP Setup, SmartIP and Network Address Translation 10-19
toggle it to Yes.
■ From the NetBIOS Type pop-up menu, select the type of NetBIOS used on your network.
■ To ser ve DHCP clients with the NetBIOS scope, select Serve NetBIOS Scope and toggle it to Yes.
Select NetBIOS Scope and enter the scope.
■ To ser ve DHCP clients with the IP address of a NetBIOS name ser ver, select Serve NetBIOS Name Server
and toggle it to Yes.
Select NetBIOS Name Server IP Address and enter the IP address for the NetBIOS name ser ver.
You are now finished setting up DHCP NetBIOS Options. To return to the IP Address Ser ving screen press
the Escape key once.
■ To enable BootP’s address ser ving capability, select Serve BOOTP Clients and toggle to Yes.
Note: Addresses assigned through BOOTP are permanently allocated from the IP Address Ser ving pool
until you release them.
To view all of the IP addresses currently being ser ved by the Netopia R2121, from the Statistics & Logs menu
select Served IP Addresses.
DHCP NetBios Options
+--------+
Serve NetBios Type: +--------+
NetBios Type... | Type B |
| Type P |
Serve NetBios Scope: | Type M |
NetBios Scope: | Type H |
+--------+
Serve NetBios Name Server: No
NetBios Name Server IP Addr: 0.0.0.0
Main
Menu
Statistics Ser ved IP
& Logs Addresses