Netopia R2121 - Manual (Page 44)

3-14 User’s Reference Guide
Static configuration (optional)
3. In the TCP/IP window or in the MacTCP/More window, select or type information into the fields as shown in
the following table.
4. Close the TCP/IP or MacTCP control panel and save the settings.
5. If you are using MacTCP, you must restar t the computer. If you are using Open Transpor t, you do not need
to restar t. These are the only fields you need to modify in this screen.
Note: You can also use these instructions to configure other computers on your network with manual or static
IP addresses. Be sure each computer on your network has its own IP address.
Option: Select/Type:
Connect via: Ethernet
Configure: Manually
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
Router address: 192.168.1.1
Name ser ver address: Enter the primar y and secondar y name
ser ver addresses given to you by your ISP
Implicit Search Path:
Star ting domain name: Enter your domain name; if you do not have
a domain name, enter the domain name of
your ISP
If you are manually configuring for a fixed or static IP address,
per form the following:
1. Go to the Apple menu. Select Control Panels and then
TCP/IP or MacTCP.
2. With the TCP/IP window open, go to the Edit menu and
select User Mode. Choose Advanced and click OK.
Or, in the MacTCP window, select Ethernet and click the
More button.