Netopia R2121 User Manual
Page 202
14-40 User’s Reference Guide
1.
Select Secure Authentication Monitor and press Return. The Secure Authentication Monitor screen
appears.
2.
Wait for the call to initiate.
3.
From the fields that appear, select Enter PASSCODE and press Return. Enter your PIN and the code
displayed on your security authentication token card LED.
4.
Once the call is established, and you enter your passcode as prompted, PPP negotiation will continue. If
the call is specified for PAP-TOKEN, and the session involves more than one connection, you will be
prompted for each connection being brought up.
Utilities & Diagnostics
Ping...
Trace Route...
Telnet...
Secure Authentication Monitor...
Trivial File Transfer Protocol (TFTP)...
X-Modem File Transfer...
Revert to Factory Defaults...
Restart System...
Secure Authentication Monitor
Current Connection Status
Profile Name---State---%Use---Remote Address---Est.---More Info---
Status --- Passcode Required
For Connection Profile: Easy Setup Profile
0-Challenge: Enter PASSCODE:
Passcode: 123412345678