Nortel Networks 822p - Manual (Page 23)

Setting Up the Projector 23
Connecting External Speakers
You can output sound to external speakers with built-in amplifiers.
When you play sound through external speakers, the projector’s
built-in speaker system is disabled.
1. Locate the appropriate cable to connect your speakers.
Depending on your speakers, you may be able to use a
commercially available audio cable with a stereo mini-jack
connector on one end and pin jacks on the other end. For some
speakers, you may have to purchase a special cable or use an
adapter.
2. Connect the stereo mini-jack end of the audio cable to the Audio
Out port on the projector.
3. Connect the other end of the cable to your speakers.
The projector’s internal speaker system is disabled while sound is
output to external speakers, and you can’t use the projector or remote
control to adjust the volume.