Turning on the password and user’s logo – Nortel Networks 822p User Manual

Page 65

Advertising
background image

Fine-tuning the Projector

65

3. When you see the message

Change the password?

, select

Yes

and press

Enter

.

4. Enter a 4-digit number using the numeric buttons on the remote

control, as shown.

The password will be displayed as

****

. After you enter the last

digit, a confirmation screen appears. Enter the password again.
You see the message

Password accepted

.

5. After you finish setting the password, press the

Esc

button to

return to the Password Protect menu.

Make a note of the password and keep it in a safe place in case you
forget it.

Turning On the Password and User’s Logo

1. Press the

Freeze

button on the remote control for about five

seconds until you see the Password Protect menu.

2. To enable the password, select

Power On Protect

and press

Enter

. Select

On

then press

Esc

.

3. To enable your screen logo, select

User’s Logo Protect

and press

Enter

. Select

On

then press

Esc

.

When this feature is on the logo appears whenever the projector is
turned on (if the

Startup Screen

is enabled in the Extended

menu; see page 58) and as the A/V Mute screen (if you selected
the

Logo

as the

Display

Background

in the Extended menu).

None of the User’s Logo features can be changed when the User’s
Logo Protect function is enabled.

4. To lock the network settings in the menu system, select

Network

Protect

and press

Enter

. Select

On

and press

Enter

.

5. Press

Menu

to close the Password Protect menu.

If you lose the remote control, you will not be able to enter the
password, so keep the remote control in a safe place at all times.

You can attach the password protect sticker to the projector as an
additional theft deterrent.

Numeric
buttons

Advertising
This manual is related to the following products:

83c