Nortel Networks 822p - Manual (Page 64)

64 Fine-tuning the Projector
7. When you see this screen, select a zoom rate (display size), and
then press Enter .
8. When you see the message Save image as user’s logo? , select
Yes and press Enter . Saving the logo takes a few moments. Do
not use the projector or other sources (computer, video, etc.)
while the logo is being saved. When you see the message
Completed , press Esc .
9. To display the logo as the background screen when you press the
A/V Mute button or when no image signal is available, select the
Extended menu and press Enter . Then select Display , Display
Background , and Logo and press Enter . Select A/V Mute and
Logo and press Enter .
10. When you’re finished, press Menu to exit the menus.
Setting a Password
1. Press the Freeze button on the remote control for about five
seconds until you see the Password Protect menu:
2. Select Password and press Enter .
note
The default setting for the
Startup Screen option
menu is On . If the Startup
Screen is set to Off , the
logo will not display at
startup.
If the User’s Logo Protect
function has been set to
On ,
the Display Background
setting cannot be changed.
You need to turn the protect
function off first. See
page 65 for details.
Once you’ve saved a user’s
logo, you cannot reset the
logo setting to its factory
default (no logo).
note
If a password has already
been set, you see the
Password Protect Release
screen. See “Starting the
Projector with a Password”
on page 66.