Using on-screen help, What to do when the lights flash, Using the projector’s on-screen help system – Nortel Networks 822p User Manual

Page 78

Advertising
background image

78

Solving Problems

Using On-Screen Help

If the image doesn’t look right or your audio isn’t working, you can
get help by pressing the

?

Help

button on the projector or remote

control.

1. Press the

?

Help

button on the remote control or projector. You

see the Help menu.

2. Use the up and down arrow buttons on the projector or remote

control to highlight the problem you want to solve. Then press
the

Enter

button to view the solution(s).

3. Press

Esc

to view another topic or press

? Help

to exit.

If none of the suggestions solves your problem, see additional
solutions to problems in the following sections.

What To Do When the Lights Flash

The lights on top of the projector indicate the projector’s status and
let you know when a problem occurs.

If the projector is not working correctly, first turn it off and unplug it.
Then plug the power cord back in and turn on the projector. If this
does not solve the problem, check the status lights on top of the
projector and try the solutions recommended in the following table.

Lamp light

Power light

Temperature
light

Advertising
This manual is related to the following products:

83c