Connecting a composite video source – Nortel Networks 822p User Manual

Page 25

Advertising
background image

Setting Up the Projector

25

Connecting a Composite Video Source

If you’re connecting a composite video device, use a commercially
available RCA A/V cable. Before starting, make sure the projector and
your DVD player or other video source are turned off.

1. Connect the yellow RCA plug on one end of the cable to the

projector’s yellow

Video

port.

2. Connect the yellow plug on the other end of the cable to the

video-out port on your video source.

3. To play sound through the projector, follow the instructions

beginning on page 29.

If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 34 for instructions.

If more than one device is connected to the projector, select the
correct source after projection starts by pressing the

Source Search

button on the projector or remote control. See page 36.

Video port

Advertising
This manual is related to the following products:

83c