Using a browser to monitor the projector – Nortel Networks 822p User Manual

Page 99

Advertising
background image

Monitoring the Projector Over a Network

99

Using a Browser to Monitor the
Projector

If your projector is connected to a network, you can use a standard
web browser to monitor and control it. When using a browser to
access the projector, you cannot connect through a proxy server.

1. Make sure that the projector is connected to your network, as

described on page 91.

2. Follow the instructions on page 58 to set

Standby Mode

to

Network On

in the Extended menu so you can monitor the

projector in standby mode.

3. Open your web browser and enter the IP address of the projector

you want to monitor in the browser window.

If you’re not sure what the address of the projector is, turn the
projector on and select

Wired LAN

from the Network menu to

display the IP address of the projector. See page 92.

You see a login screen.

4. Do one of the following:

If you didn’t set a Web Control Password in the Network
menu, click

OK

.

If you set a Web Control password in the Network menu,
enter it in the

Password

box, then click

OK

.

You see a screen displaying the settings you can change.

5. Select one of the menu options, then change any settings as

needed. These settings correspond to those found in the
projector’s menu system. See page 50 for details.

You cannot change the

User’s Logo

,

High Altitude Mode

, and

Language

settings in the Extended menu or select the

Reset All

and

Reset Lamp Hours

in the Reset menu

Use the controls at the bottom of the screen to choose a source, stop
the action, turn off the picture and sound, or turn the projector’s
power on or off.

Advertising
This manual is related to the following products:

83c