Nortel Networks 822p - Manual (Page 98)

98 Monitoring the Projector Over a Network
Using E-mail Alerts
You can set up e-mail alerts to warn you of problems with the
projector.
1. Open EMP Monitor.
2. From the Tool menu, select Mail notification function .
3. Turn the Mail notification function setting On .
4. Enter the IP address and port number of your network’s SMTP
(outgoing) mail server.
5. Enter the Sender (projector) mail address.
6. Enter up to three e-mail addresses to send alerts to in the
Recipient mail address boxes.
7. Click the Notification event buttons to select the conditions
under which an e-mail alert will be sent.
8. When you’re done, click the OK button.
If a projector experiences a problem, EMP Monitor sends an e-mail
message to each of the addresses you entered in the Set mail
notification function window. The subject line and body of the
message includes the projector’s name and the warning or error
(similar to the those listed on page 95).
When the problem has been fixed, EMP Monitor sends a message
indicating the problem has been resolved.
note
You can also set e-mail alerts
from the projector’s menu
system (see page 93).
note
If a projector develops a
critical problem, it may not
be possible for it to report the
error.