Correcting computer images, Adjusting the volume – Nortel Networks 822p User Manual

Page 41

Advertising
background image

Projecting

41

Correcting Computer Images

If you’ve connected a computer and the image doesn’t look right, or it
doesn’t fit properly on the screen, press the

Enter

button on the

projector or the

Enter/Auto

button on the remote control. This

automatically resets the projector’s tracking, sync, resolution, and
position settings. You must be projecting a computer image for this
button to have any effect. Additionally, if the

Auto Setup

option in

the Signal menu is set to

Off

, the Auto function will not work. See

page 55.

Adjusting the Volume

You can use the

Vol-

and

Vol+

buttons on the remote control to

increase or decrease the volume for the projector’s built-in speaker.

You can also use the buttons on the projector to control the volume.
Press the

button to increase the volume, or the

button to

decrease it. A volume gauge appears on the screen while the volume is
being adjusted.

note

You can also adjust the
volume using the projector’s
Settings menu. See page 56
for details.

You must adjust the volume
separately for each input
source.

Volume control
buttons

Advertising
This manual is related to the following products:

83c