Nortel Networks 822p - Manual (Page 90)

90 Monitoring the Projector Over a Network
Installing the Network Software
The network software CD-ROM includes the software you need to
monitor the projector from a remote location. The Epson Projector
Software CD-ROM includes EMP Monitor for monitoring the
projector from a remote location.
Windows System Requirements
Before you install the software, make sure your computer meets these
requirements:
■ Microsoft Windows 98SE, Me, 2000 (SP4), or Windows XP
■ IBM ® compatible PC with at least a Pentium ® III 1.2 GHz
processor
■ At least 256MB of RAM (512 recommended)
■ At least 128MB of free hard disk space
■ XGA (1024
× 768) or better display adapter and monitor, 16-bit
color or higher
Installing the Software on a Windows System
1. Insert the network software CD-ROM in your computer’s
CD-ROM or DVD drive.
2. Click Custom , then make sure EMP Monitor is selected.
3. Click Install , then follow the on-screen instructions to install
your projector software.
4. When installation is complete, click Exit .