Nortel Networks 8005DC - Manual (Page 111)

8616SXE module 111
MTBF rating
147 602 hr
Connector type
RJ-45 (see
"Pin assignments: 8616GTE module port" (page 111) )
Cable specifications
Type:
Category 5 or better UTP cable for 1000 Mb/s operation. Cables must use all four pairs. Wiring
configuration and performance are defined by EIA/TIA Standard 568 and IEEE Standard 802.3 2000
edition.
Maximum distance:
328 ft (100 m)
Port connectors
The ports on the 8616GTE module are RJ-45 ports wired as shown in "Pin
assignments: 8616GTE module port" (page 111) .
Pin assignments: 8616GTE module port
Connector Pin number Signal
1 Bidirectional Data A + (BI_DA+)
2 Bidirectional Data A – (BI_DA–)
3 Bidirectional Data B + (BI_DB+)
4 Bidirectional Data C + (BI_DC+)
5 Bidirectional Data C – (BI_DC–)
6 Bidirectional Data B – (BI_DB–)
7 Bidirectional Data D + (BI_DD+)
8 Bidirectional Data D – (BI_DD–)
8616SXE module
Physical specifications
Height:
1.5 in. (3.8 cm)
Width:
15.4 in. (39.1 cm)
Depth:
18.5 in. (47.0 cm)
Weight:
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.