Ethernet management port, Dce/dte switch, Serial ports – Nortel Networks 8005DC User Manual

Page 71

Advertising
background image

8692omSF module

71

Label

Color/State

Meaning

Green/Steady

The specified fan is operating normally.

Fan 1, 2

Amber/Steady

The specified fan has failed.

Green/Steady

The temperature is normal for switch operation.

Temp

Amber/Steady

The temperature of the switch has exceeded the maximum
operating temperature.

Green/Steady

The CPU subsystem on the module is performing diagnostics.

Green/Blinking

This module is providing active CPU functions for the switch
and is the master CPU module.

Amber/Steady

The CPU subsystem is in a fault state.

Master

Off

The CPU subsystem on the module is up and is in standby
mode.

Green/Steady

The switch fabric portion of the module is online and is
load-sharing.

Amber/Steady

The switch fabric portion of the module failed diagnostics.

Online

Off

The switch fabric portion of the module is offline.

Ethernet management port

The Ethernet management port on the 8692omSF module is an MDI
10/100BaseT port that allows out-of-band management of the switch using
a Web browser or Device Manager. You can also establish a Telnet or SSH
(Secure Shell) session to access the CLI. Use this port to connect the switch
to a network management station. The Ethernet management port has its
own IP address but does not switch traffic to other ports in the chassis.

Note that you use this port only as a management port. This port provides
out-of-band management for the 8692omSF module.

DCE/DTE switch

The DCE/DTE switch changes the pin assignments on the Console port
and allows you to designate the connector as either DTE or DCE. For
information about pin assignments for the Console port, see

"Console serial

port" (page 132)

.

Serial ports

The 8692omSF module provides two serial ports for attaching modem
and console devices. The Console port provides terminal access to the
8692omSF module to use the CLI. The Modem port allows you to connect
a standard modem for out-of-band, dial-up management. For information
about pin assignments for these ports, see

"Console serial port" (page

132)

and

"Modem serial port" (page 133)

.

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306

02.02

Standard

4.2

7 July 2008

Copyright © 2005-2007, Nortel Networks

.

Advertising
This manual is related to the following products: