Nortel Networks 8005DC - Manual (Page 26)

26 Metro Ethernet Routing Switch 8600 modules
GBIC order number GBIC type
AA1419004 1000BaseZX
AA1419041 1000BaseT
AA1419017-9024 CWDM wavelengths 1470nm-1610nm
Only GBICs that Nortel qualified are supported for use in the 8608GBE
Module. GBICs that Nortel did not qualify can operate within the module,
but were not tested for power draw, electromagnetic interference, and
interoperability.
For more information about the GBICs and instructions for installing them,
see Nortel Installation — SFP, XFP, and GBIC Hardware Components
(NN46225-301).
"8608GBE/8608GBM module LEDs" (page 26) shows the location of the
8608GBE and 8608GBM module LEDs.
8608GBE/8608GBM module LEDs
"8608GBE/8608GBM module LEDs" (page 26) describes the 8608GBE and
8608GBM module LEDs.
8608GBE/8608GBM module LEDs
Type Label Color/State Meaning
Green/Blinking The port is transmitting data.
Amber/Steady A fault condition exists on the line or on
the attached remote device.
TX
Off The port did not detect a fault condition.
Green/Steady The port has a link and is enabled.
Green/Blinking The port is receiving data.
Amber/Steady The port has either no optical signal or
no link synchronization.
Port
RX
Off The port has signal but no link.
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.