Nortel Networks 8005DC - Manual (Page 62)

62 Metro Ethernet Routing Switch 8600 modules
"8683XZR Module LEDs" (page 62) shows the location of the 8683XZR
Module LEDs.
8683XZR Module LEDs
" 8683XZR Module LEDs" (page 62) describes the 8683XZR Module LEDs.
8683XZR Module LEDs
Type Label Color/State Meaning
Green/Steady The port is enabled but not transmitting
data.
Green/Blinking The port is transmitting data.
TX
Off The port is disabled.
Green/Steady The port has a link and is enabled.
Green/Blinking The port is receiving data.
Port
RX
Amber/Steady The cable is disconnected, the port is
disabled, or the link is down.
Green/Steady The module completed its power-on
self-test and software initialization and
is operating normally.
Amber/Steady The module slot is disabled.
Module Online
Off The switch power is off. If the switch
power is on, the module is going
through its power-on self-test and
software initialization. A module in this
state is not yet functional.
See Using Metro Ethernet Routing Switch 8600 10 Gigabit Ethernet
Modules (315893-E) for a description of how to configure the 8683XZR
Module using the command line interface (CLI) or Device Manager.
The 8683XZR module is an R module. When 8683XZR ports are used in
the Enterprise mode of operation, it supports the following:
• 256 000 IP routes
• 64 000 MAC records
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.