Nortel Networks 8005DC - Manual (Page 32)

32 Metro Ethernet Routing Switch 8600 modules
8616GTE module
The 8616GTE module ( "8616GTE module" (page 32) ) provides 16
1000BaseT, copper Gigabit Ethernet ports with 8-pin modular (RJ-45)
connectors. Each port operates in 1000 Mb/s (1 Gb/s) full-duplex mode and
supports the IEEE 802.3ae standard. Distances of up to 100 meters are
obtainable with Category-5 unshielded twisted pair (UTP) cable.
8616GTE module
"8616GTE module LEDs" (page 32) shows the location of the 8616GTE
module LEDs.
8616GTE module LEDs
"8616GTE module LEDs" (page 32) describes the 8616GTE module LEDs.
8616GTE module LEDs
Type Label Color/State Meaning
Green/Steady The port has established a link and is enabled.
Amber/Steady The port is connected, but an error condition is
detected.
Link
Off The port is disabled or has no link.
Port
Activity Green/Blinking The port is receiving data.
Note that as port utilization increases, this LED
may blink so fast that it appears to be steady.
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.