Nortel Networks 8005DC - Manual (Page 97)

Initializing the 8672ATME, 8672ATMM, and 8683POSM modules 97
For more information about the PC Card slot and the CPU module, see "PC
Card slot" (page 67) (8691omSF) or "PC Card slot" (page 72) (8692omSF).
The following sections describe the initialization process for the 8672ATME,
8672ATMM, and 8683POSM modules.
Initializing the 8672ATME and 8672ATMM modules
The CPU module retrieves the image file to download to the 8672ATME or
8672ATMM module. First, the CPU module searches the host flash memory
for the file, then the PC Card. The CPU module downloads the image file to
the 8672ATME, or 8672ATMM and identifies which MDAs are installed. The
screen displays a message similar to the following:
Using image = /slot/p80t3600.dld for ATM card download.
ATM card: Slot 4 MDA [OC-12c MM] [Quad OC-3c MM] Ver=2.2
If the image file is not found in either the flash memory or the PC Card, the
system stops and the screen displays an error message such as:
ERROR Task=rcStart Couldn’t find an ATM download image!
Aborting card initialization in Slot=4
or:
ERROR Task=rcStart portPresent:port=X/X, invalid port Type
The 8672ATME or 8672ATMM module requests a redownload from the
switch fabric module, and the screen displays the following message:
Redownload requested by ATM card in slot <number>.
If the image download is unsuccessful, the screen displays the following
message:
ATM card in slot <number> not ready.
If there are three unsuccessful attempts to download, the screen displays
the message shown in
"Unsuccessful download screen output" (page 98) .
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.