Nortel Networks 8005DC - Manual (Page 41)

8632TXE and 8632TXM modules 41
8632TXE and 8632TXM modules
Both the 8632TXE and 8632TXM modules ( "8632TXE/8632TXM module"
(page 41) ) provide 32 autonegotiating 10BaseT/100BaseTX ports using
8-pin modular (RJ-45) connectors. Ports operate at either 10 Mb/s or 100
Mb/s up to distances of 100 m with Category-3 or greater unshielded
twisted pair (UTP) cable.
Also, the modules provide two bays for 1000BaseX Gigabit Ethernet
interface connectors (GBIC).
8632TXE/8632TXM module
The 8632TXE and 8632TXM module ports support the IEEE 802.3 1998
Clause 28 autonegotiation standard. Each port can operate in full- or
half-duplex mode. When a port is connected to another device that also
supports the IEEE 802.3 1998 Clause 28 autonegotiation standard, the
two devices negotiate the highest possible data rate and the duplex mode
of operation.
Nortel qualified the GBICs listed in "8632TXE and 8632TXM qualified
GBICs" (page 41) for use in the 8632TXE and 8632TXM modules:
8632TXE and 8632TXM qualified GBICs
GBIC order number GBIC type
AA1419001 1000BaseSX
AA1419002 1000BaseLX
AA1419003 1000BaseXD
AA1419004 1000BaseZX
AA1419041 1000BaseT
AA1419017-9024 CWDM wavelengths 1470nm-1610nm
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306 02.02 Standard
4.2 7 July 2008
Copyright © 2005-2007, Nortel Networks
.