NetComm NB6PLUS4WN - Manual (Page 121)

YML854 Rev1 NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide
www.netcomm.com.au 11
management
Diagnostics
To check the linking status for the network and your computer, a diagnostic test can guide you to detect the
network problem. The testing items are listed and examined one by one. If the previous one is failed, than
the items following that one will be failed, too. Use this diagnostic test to detect the connectivity mistakes
whenever linking problem occurs.
Press Run Diagnostic Tests on the Diagnostic Tests page.
The Result would be shown on the same page.
For the item which passes through the diagnostics, a “ PASS” will be displayed on the right side of that item.
If not, a “ FAIL” will be presented there.
If there is no device using that port, a “ DOWN” will be displayed.
Press the Help link to know what the result (Pass, Fail) represents for.