NetComm NB6PLUS4WN User Manual
Page 84
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
User Guide
YML854Rev1
84
www.netcomm.com.au
User defined:
Type a new service name for building a customized service for specific purpose.
There are three lines that you can enter settings into on this page. If you need more lines, just apply
the settings and then add a new port forwarding rule.
From Internet Host IP Address:
Select the initial place for port forwarding. If you choose
SINGLE, a box will appear for you to fill
in the IP address for the specific host. And, if you choose
SUBNET, the boxes for IP address and
Netmask will appear for you to fill in the IP address and subnet mask for the specific subnet.
Forward to Internal Host IP Address:
Key in the address for the host used as the destination that information will be forwarded to.
For example, select the predefined application name Audio/Video – Media Player 7, set from ALL
internet host IP addresses, and forward to 192.168.1.200. Click
Apply. Be sure to reboot your router
for these changes to take effect.