NetComm NB6PLUS4WN - Manual (Page 54)

NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide YML854Rev1
54 www.netcomm.com.au
IP over ATm
If the type you have to choose is IP over ATM, please refer to the following information.
IPoA is an alternative of LAN emulation. It allows TCP/IP network to access ATM network and uses ATM quality
of service’s features.
Choose IPoA and click Next.
None:
If it is not necessary to set the WAN IP address, please click this button.
Obtain an IP address automatically:
Click this button to allow the system to get an IP address automatically.
WAN IP Address & WAN Subnet mask:
If you choose Use the following IP address, you have to enter the IP address and subnet mask
information received from the ISP for the WAN interface.
Obtain DNS server address automatically:
Only when you select Obtain an IP address automatically that this option is available. You may click
this button to allow the system to get DNS server address automatically.
Use the following DNS server addresses:
Select this item to set the DNS server addresses manually, type the information provided by your ISP
in the following
Primary DNS and Secondary DNS server entries, e.g. 168.95.1.1 and 168.95.192.1.
Click Enable NAT if you want.