NetComm NB6PLUS4WN User Manual
Page 71
YML854 Rev1
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
User Guide
www.netcomm.com.au
1
Internet – Connections
To set WAN settings for each service, please open
Advanced – Internet. This page allows you to edit, to
remove, or to add WAN settings.
If you click the
Connect hyperlink under the PVC Name item, the system will connect to WAN automatically. If
the WAN connection is OK, you can check the detailed information directly.
You can add new PVC(s) by clicking the
Add button, edit the settings for the present PVC by clicking
in
the
Edit column, or delete the existing PVC by pressing
icon.
Adding a New One
To add a new WAN connection, please click the
Add button. The following screen appears.
vPI (virtual Path Identifier):
Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255.
Please refer to the value that your ISP provides.
vCI (virtual Channel Identifier):
Identifies the virtual channel endpoints in an ATM network. The valid range is from 32 to 65535 (1 to
31 is reserved for well-known protocols). Please refer to the value that your ISP provides.