NetComm NB6PLUS4WN User Manual
Page 72
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
User Guide
YML854Rev1
www.netcomm.com.au
Service Category:
It decides the size and rate for the packets of the data in different service type. There are five
categories provided here for your selection, shown as the drop-down menu below.
If you select
UBR with PCR or CBR, you have to offer the value for the peak cell rate.
If you choose
Non Realtime VBR, or Realtime VBR, you have to key in the value for the peak cell
rate, sustainable cell rate, and maximum burst size.
As you can see above, the range for
Peak Cell Rate is from 1 to 2500; the value for Sustainable Cell
Rate ranges from 1 to 2499 and must be smaller than Peak Cell Rate, and the range for Maximum
Burst Size is from 1 to 1000000.
After pressing
Next, you will see the web page below. Choose the protocol that you would like to use. (Here
provides the example for PPPoA.)
Please refer to Quick Setup for more information if you don’t know how to set the configuration.