NetComm NB6PLUS4WN - Manual (Page 124)

NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide YML854Rev1
14 www.netcomm.com.au
management Control – From Remote
There are various interfaces for the remote access. Please choose from them if you want to enable the remote
access control.
Note: NB6 supports Web Browser, Telnet, TFTP and Ping only
Select the Internet Connect:
Select one connection item from the drop-down list to enable the function.
Web Browser:
Check this box if you want to have remote control through HTTP. The default port number is 8080.
Modify the port whenever you want.
Telnet:
Check this box if you want to have remote control through telnet.
FTP:
Choose this box if you want to have remote control through FTP.
TFTP:
Choose this box if you want to have remote control through TFTP.
Secure Shell (SSH):
Choose this box if you want to have remote control through SSH.
Ping:
Choose this box if you want to have remote control through ping command under DOS prompt.
Authorized Host IP Address List:
Decide whether all internet hosts can access your IAD or only authorized internet hosts can access.
Click
Apply to save your setting.